Ultrathin cutting discs

A46S: Improved formula with ceramic grits addition. Just one cutting disc suited for both Inox and metal. High performance fast cutting disc, for industrial applications.

ZA60: zirconia formula

MCT-G

MCTG

Ø Thickness Bore Abrasive
115 1,0 22 A46S 100 13.300
115 1,6 22 A46S 100 13.300
125 1,0 22 A46S 100 12.200
125 1,6 22 A46S 100 12.200
180 1,6 22 ZA60 50 8.500
230 1,9 22 ZA60 50 6.600
230 2,0 22 A46S 25 6.600

Mini cutting discs

Quick cutting of steel sheets, tubes, profiles and full-material.
Ideal to work in hard to reach places and to cut with a low pressure on the wrok-piece on thin material.

Available upor request:
Diameters: 40, 50, 60, 65, 70, 75, 80
Widths: 1,2/1,5/1,8/2/2,4/2,5/3/3,2/3,5/4/4,8/5/6/6,4/8/10mm

MCT

MCTG

Ø Thickness Bore Abrasive
50 1,2 6 A46S 100 30.500
50 2 6 A46S 100 30.500
50 3 6 A46S 100 30.500
75 1,2 10 A46S 100 20.100
75 1,6 10 A46S 100 20.100
75 2 10 A46S 100 20.100
75 3,2 10 A46S 60 20.100
75 4,8 10 A46S 40 20.100
75 6,4 10 A46S 32 20.100

Industrial cutting discs

Just one cutting disc suited for both Inox and metal. High performance fast cutting disc, for industrial applications.

MCTG

MCTG

Ø Thickness Bore Abrasive
115 3,2 22 A30N 50 13.300
125 3,2 22 A30N 50 12.200
230 3,2 22 A30N 25 6.600

Ultrathin cutting discs

Fast cut, less stock removal and heat development. Suited for thin sections.

A36S: Standard product for all metals.
A36N: For high alloy and stainless steel, hardened.
AC46S: For aluminium

MCT

MCT

Ø Thickness Bore Abrasive
115 1 22 A36S, A36N, AC46S 100 13.300
115 1,6 22 A36S, A36N 100 13.300
125 1 22 A36N 100 12.200
125 1,6 22 A36S, A36N 100 12.200
230 2 22 A36N, AC46S 100 6.600

Depressed centre cutting discs

A30S: For general use on mild and medium hardeness steel, small sections, sheet metal, pipes, profiles, common cast iron, non ferrous metals.
A36N: Suited for hard to cut steel such as hardened, high alloy and stainless steel.
C30S: For masonry products.Upon request
A30N: For aluminum.

MCT

MCT

Ø Thickness Bore Abrasive
115 3,2 22 A30S, A36N, C30S, A30N 50 13.300
125 3,2 22 A30S, A36N, A30N 50 12.200
180 3,2 22 A30S 50 8.500
230 3,2 22 A30S, A36N, C30S, A30N 25 6.600

Reinforced flat cutting-off discs

Suited for cutting-off full sections on mild and alloy steel by using stationery machines.

MPT

MPT

Ø Thickness Bore Abrasive
300 2,5 25 A46N 25 5.100
300 3,8 30 A46N 25 5.100
350 3,0 25 A46N 25 4.400
400 3,5 25 A46N 25 3.800

Non reinforced cutting discs

Suited to be used with machines with a fixed base, where the wheels are properly guarded and operates on a controlled cutting plane.
It is recommended to pay the maximum attention to the cutting speed that should be the highest possible marked on the wheel.

Available upon request:
Ø 50,60,65,70,75,80,175,200,230
Thickness: 1,2, 1,6 2, 2,5, 3, 3,5

MTB

MTB

Ø Thickness Bore Abrasive
150 1,0 16 A80P 25 5.730
150 1,0 20 A80P 25 5.730
150 1,6 20 A80P 25 5.730
175 1,6 20 A80P 25 4.950
200 1,6 20 A80P 25 4.230
200 2,0 20 A80P 25 4.230