100x100 PROGRAM

100x100 program

Non woven flap wheels

Satin finish and oxidations removal.

Available upon request:
Bore 25
Silicon Carbide

NTL

NTL

Size Bore Grits
100 x 50 19,1 Coarse, Medium, Fine, V.Fine, U.Fine 5 6.800
100 x 100 19,1 Coarse, Medium, Fine, V.Fine, U.Fine 5 6.800
110 x 50 19,1 Coarse, Medium, Fine, V.Fine, U.Fine 5 6.800
110 x 100 19,1 Coarse, Medium, Fine, V.Fine, U.Fine 5 6.800

Spiral non woven flap wheels

This new patented shape allows the operator to reach a satin finish without the typical marks left by each single run of the wheel on its sides. The final result is a much easier and better finish and a big time saving for the user.

NSL

NSL

Size Bore Grits
110 x 100 19,1 Coarse, Medium, Fine, V.Fine 1 6.800

Heavy duty non woven

Heavy duty a coarse non woven, made with an open and very resistant structure. Much longer life compared to traditional a corse non woven, softer and finer finishing compared to black cleaner.

NTB

NTB

Size Bore Grits
100 x 100 19,1 S Coarse 1 6.800

Cutting & Polishing

Particular kind of non woven with good cut and very fine finishing.

CPF

CPF

Size Bore Grits
105 x 50 19,1 Medium, Very Fine 1 6.800
105 x 100 19,1 Medium, Very Fine 1 6.800

Convolute wheels

Open structure convolute wheels, soft but resistant.
Suited to give consistent surface finishing , blending and covering abrasive and tool marks.

NTA

NTA

Size Bore Grits
110 x 100 19,1 Medium, Fine 1 6.000

Interleaved flap wheels

Light grinding and finishing combined. Suited for eliminating scratches.

Available upon request:
Bore 25

NTM

NTM

Size Bore Grits
100 x 50 19,1 40,60,80,100,120,150,180,240 5 6.800
100 x 100 19,1 40,60,80,100,120,150,180,240 5 6.800

Spiral interleaved flap wheels

This new patented shape allows the operator to reach a satin finish without the typical marks left by each single run of the wheel on its sides. The final result is a much easier and better finish and a big time saving for the user.

Available upon request:
Bore 25

NSM

NSM

Size Bore Grits
100 x 100 19,1 60,80,150 1 6.800

Cloth flap wheels

For grinding and cleaning of regular surfaces: it removes rust, scratches and welding marks.

Available upon request:
Bore 25

RLF

RLF

Size Bore Grits
100 x 50 19,1 40,60,80,120,180,240 5 6.800
100 x 100 19,1 40,60,80,120,180,240 5 6.800

Zirconium flap wheels

Zirconia cloth for inox and special steels.

RLZ

RLZ

Size Bore Grits
100 x 100 19,1 40,60,80,120 5 6.800

Slashed cloth flap wheels

The irregular profiles of the flaps avoid the typical marks left by each single run of the wheel on its sides. It is easier to reach a regular surface for further finishing or polishing steps.
Suited as well for irregular surfaces and countoured workpieces.

RLT

RLT

Size Bore Grits
120 x 50 19,1 40,60,80,120,240 1 6.800
120 x 100 19,1 40,60,80,120,240 1 6.800

Black Cleaner flap wheels

Removing varnish, oxidations, rust.

BKL

BKL

Size Bore
100 x 50 19,1 1 6.800
100 x 100 19,1 1 6.800

Steel wire brushes wheels

Suited for paint and rust removing and light deburring. Antique effect in wood.

Bore 13: Makita suitable brushes.

RFA

RFA

Size Bore Wire
100 x 70 19,1 0,3 1 6.800
100 x 100 19,1 0,3 1 6.800
100 x 120 13 0,3 1 6.800

Inox wire brushes wheels

Suited for stainless steel brushing.

RFI

RFI

Size Bore Wire
100 x 70 19,1 0,2 1 6.800
100 x 100 19,1 0,2 1 6.800

Nylon wire brushes wheels

Graining of wood with rustic effect.

Bore 13: Makita suitable brushes.

RNA

RNA

Size Bore Grits
100 x 70 19,1 80 1 6.800
100 x 100 19,1 46,80 1 6.800
100 x 120 13 80 1 6.800

Abrasive rubber wheel

High quality stainless satin finish, with shine effect, suited for flat sheets.

RAG

RAG

Size Bore Grits
104 x 50 19,1 16,46,120 1 1.910
104 x 120 13 16,46,120 1 1.910

Expanding rubber wheel

To be used as a support for cloth and surface conditioning endless belts.

REC

REC

Size Bore
90 x 100 35 - 19,1 1 6.000

Pneumatic rubber wheel

To be used as a support for cloth and surface conditioning endless belts.
Inflatable, softer contact with the workpiece.

REP

REP

Size Bore
90 x 90 19,1 1 6.000
90 x 100 19,1 1 6.000
100 x 100 19,1 1 6.000
120 x 80 M14 1 6.000

Cloth belts

Suited to give a linear grinding and to prepare the surface for a finer finishing with satin or polishing products.

NKM

NKM

Size Abrasive Grits
Ø90 x 100 Al.Oxide 40,60,80,120,180,220 10
Ø90 x 100 Zirconium 40,60,80,120 10
Ø120 x 80 Zirconium 40,60,80,120 10

Ceramic belts

Ceramic cloth, long lasting and very aggressive. Suited for heavy duty applications with fast stock removal.

NCK

NCK

Size Abrasive Grits
Ø90 x 100 Ceramic 40,60,80 10

Scotch-Brite™ belts

Satin finish and oxidations removal.

SCB

SCB

Size Grits
Ø90 x 100 Coarse, Medium, V.Fine, S.Fine 10

Trizact™ belts

Suited to give uniform and costant finishing in a few steps and to prepare the surface for mirror polishing.


GRIT COMPARISON CHART
Trizact™ A6 A16 A30 A45 A65 A80 A100 A160
FEPA 2000 1200 600 400 280 240 220 120
TNC

TNC

Size Grits
Ø90 x 100 A16,A30,A45,A65,A100, A160 10

Ventilated cotton discs

Mirror Polishing

N° of discs to get 100x100 wheel:
10 discs.

DCV

DCV

Ø Bore
100 19,1 1(10pcs)

Sisal-Cotton discs

Suited for inox to eliminate abrasive marks and before polishing operations with felt or cotton.

N° of discs to get 100x100 wheel:
7 discs.

DSC

DSC

Ø Bore
100 19,1 1(7pcs)

Rubber belt supporter

The drive pulley runs inward-facing belts for finishing tube forms. The hook & loop closing straps allow the belts to be opened and closed around closed tube forms. Bulk sanding rolls can be turned into belts.

TGB

TGP

Size Bore
Ø65 x 100 19,1 1