Al.Oxide velcro discs

High quality (F) weight al.oxide, for industrial applications.Sanding of metal, wood, leather.

Available upon request:
- Other sizes & other dust holes

VDS

VDS

Ø Holes Grits
115 - 40,60,80,100,120,150,180,220 100
125 8 40,60,80,100,120,150,180,220 100
150 - 40,60,80,100,120,150,180,220 100
150 6 40,60,80,100,120,150,180,220 100
150 8 + 1 40,60,80,100,120,150,180,220 100

Zirconium velcro discs

Top quality, heavy weight (F) zirconia. Rapid material removal, very long life. Stainless steel, metal, hard wood.

VDZ

VDZ

Ø Holes Grits
115 - 40,60,80,100,120 100
150 - 40,60,80,100,120 100
150 6 40,60,80,100,120 100

Stearate velcro discs

Double resin stearate (C) weight paper, open coat.Dry sanding of primers, fillers, paints, plastic.

Available grit sizes:
400,320,240,180,120,100,80,60,40

VDL

VDL

Ø Holes Grits
150 - 60,80,100,120,150,180,240,320,400 100
150 6 60,80,100,120,150,180,240,320,400 100
150 8 + 1 60,80,100,120,150,180,240,320,400 100

Lubricant velcro discs

(C) weight semi open coat aluminum oxide paper with lubrificant on a velcro backing.

Suited for paints, fillers, laquers, wood, plastic, metal.

Dry use only.

Available grit sizes:
40,60,80,120,150,180,220,320,400,500,600

VDG

VDG

Ø Holes Grits
150 - 40,60,80,120,150,180,220,320,400,500,600 100
150 8 + 6 + 1 40,60,80,120,150,180,220,320,400,500,600 100

Silicon carbide velcro discs

Silicon carbide heavy weight (F), close coated.
For wood, parquet, marble, plastic, non ferrous.

Available upon request:
- Other diameters, grits, and bores.

VDC

VDC

Ø Holes Grits
125 - 40,60,80,120,220 100
150 - 40,60,80,120,220 100
180 - 40,60,80,120,220 100

Zirconium cloth velcro discs

Zirconia cloth, closed coating
Rapid material removal, very long life. The heavier support can resist to higher speed and pressure compared to paper backing. Wet and dry working on steels, special alloys, leather, hard wood.

VDX

VDX

Ø Holes Grits
115 - 40,60,80,120 50
125 - 40,60,80,120 50
150 - 40,60,80,120 50

Inoxbrill velcro discs

For high gloss polishing without using pastes and compounds. Thank to its structure and foam layer it has a gentle and equal dust free action. Suited for stainless steel and all sorts of metals, soft ones included, Corian, varnish, plastic, acrylic.

DIB

DIB

Ø Grits
115 800,1800,2500,3000 10
150 600,800,1800,2000,2500,3000 10

Sanding screen velcro discs

Abrasives Mesh is coated on screen, while conventional abrasives are coated on papers, this gives the following advantages:
1. Up to 90% dust extraction, it’s an environmentally friendly product.
2. Non clogging.
3. Heat resistant, can be used on high-speed grinding machines.
4. Can be used dry or wet.
5. longer life compared to traditional sandpaper.

Fields of application: Automotive refinishing, marine industry, wood working, metal working, composites working, constructions, diy.

DRV

DRV

Ø Grits
125 60,80,120,180,240,320,400,600,800 50
150 60,80,120,180,240,320,400,600,800 50

Interface pad

A soft foam layer that can be put between the backing pad and the velcro disc, ideal DIB discs and for softer touch with very fine grit sizes.

DIV

DIV

Ø Width Holes
50 12 - 1
75 12 - 1
115 12 - 1
128 12 8 + 1 1
150 12 - 1
150 12 6 + 1 1
150 12 8 + 1 1

Backing pads

Backing pads with foam, M14.

VDP

VDP

Ø Width Bore
115 12 M14 1 13.300
125 12 M14 1 12.200
125 18 M14 1 6.800
150 12 M14 1 10.000
150 18 M14 1 4.800

Backing pads

Soft backing pads for contour polishing
PUR molded, soft , good rebounding and durability.
Ideal for contour face polishing, e.g.car body, fiberglass piece, boat, floor etc.
Suggested to work with lambswool pads, foam pads and abrasive discs.

Medium backing pads for general polishing job
PUR molded, good rebounding and durability.

VSP

VSP

SOFT HARDNESS
Ø Width Bore
50 22 M14 1 12.000
75 13 M14 1 12.200
75 22 M14 1 12.000
125 12 M14 1 12.200
150 12 M14 1 10.000
HARD HARDNESS
Ø Width Bore
115 15 M14 1 10.000
125 15 M14 1 10.000
150 15 M14 1 7.000
180 13 M14 1 5.000

Backing pads without foam

Backing pads for velcro fixing system discs.

VDR

VDR

Ø Bore
105 M14 1 15.000
115 M14 1 13.300
125 M14 1 12.200
150 M14 1 10.000

Backing pads for orbital sanders

PUR molded, Medium density , good rebounding and durability. Well controlled balance and weight for vibration-free operation.
One-piece bolt 5/16'', strong and precise.

VDF

VDF

Ø Width Fixing Holes
125 10 5/16'' - 1 12.000
125 10 5/16'' 8 1 12.000
150 10 5/16'' - 1 10.000
150 10 5/16'' 8 1 10.000

Multi hole backing pads

The 2-layer structure and unique interior air flow channel, with side dust absorption feature, improve the cleaning and keep the regimal temperature well-distributed in each area of the sanding disc.

vmf holes
VMF

VMF

Ø Width Fixing Holes
125 10 5/16'' 44 1 12.000
150 9 5/16'' 53 1 12.000
150 14 5/16'' - M8 8+6+1 1 12.000
150 14 5/16'' - M8 8+6+8+1 1 12.000
150 14 5/16'' - M8 Multiair 1 12.000

Velcro protector layer

Velcro protector layer.

VLS

VLS

Ø Holes
125 - 1
150 - 1
150 6 1
150 8+1 1
150 8+6+1 1
150 8+6+8+1 1