FASTGRINDER ABRASIVES Rosver S.r.l.
Via Concordia 5/C6
20099 Sesto San Giovanni (MI) - Italy
tel. +39 0224417219 - fax +39 022403942

CONTACT ROSVER Contact us

ABRASIVES

| Coated abrasives |

| Rigid abrasives |

| Non woven |

| Products for machines |

| Polishing |

| Wire brushes |

ABRASIVES

Rigid abrasives

  Cutting discs

  Grinding discs

  White Cleaner

  Bonded wheels

  Bench wheels

  Semiflexible discs

  Rubber mounted points

  Rubber blocks

  Rubber wheels

  Cup grinders

Best Abrasives
 


LEFT CUTTING DISCS INOXIndustrial cutting off discs RIGHT

Art: MCT-GOLD
New generation of reinforced cutting-off wheels, to be used with mini angle grinders. Fast cut, less stock removal and heat development. Suited for thin sections.

A46S:

Just one cutting discs suited for both inox and metal. High performance fast cutting disc, for industrial applications.

ø

Width

Bore

Abrasive

50 1,2 6 A46S
50 2 6 A46S
75 1,2 10 A46S
75 2 10 A46S
115 1 22 A46S
115 1,6 22 A46S
125 1 22 A46S
125 1,6 22 A46S

INDUSTRIAL CUTTING DISCS

LEFT ULTRA THIN CUTTING DISCSUltra thin cutting off discs RIGHT

Art: MCT

A36S: Standard product for all metals.
A36N: For high alloy and stainless steel, hardened.

ø

Width

Bore

type

115 1,2 22 A36S, A36N
115 1,6 22 A36S, A36N
125 1,6 22 A36S, A36N
230 2 22 A36N

ULTRATHIN CUTTING DISCS

LEFT reinforced cutting discsReinforced depressed centre cutting off discs RIGHT

Art: MCT

A30S: For general use on mild and medium hardness steel, small sections, sheet metal, pipes, profiles, common cast iron, non ferrous metals.
A36N: Suited for hard to cut steel such as hardened, high alloy and stainless steel.
C30S: For masonry products.
A30N: For Aluminum

DEPRESSED CENTRE CUTTING DISCS

ø

Width

Bore

Type

115 3,2 22 A30S, A36N, C30S, A30N
125 3,2 22 A30S, A36N, A30N
180 3,2 22 A30S
230 2,5 22 A36N
230 3,2 22 A30S, A36N, C30S, A30N
LEFT reinforced flat cutting discsReinforced flat cutting off discs RIGHT

Art: MPT
Suited for cutting-off full sections on mild and alloy steel by using stationery machines

ø

Width

Bore

Abrasive

300 2,5 25 A46N
300 3,8 30 A46N
350 3 25 A46N

Available upon request:
- ø 400, 450, 500
- Different bore sizes

FLAT CUTTING OFF DISCS

LEFT non reinforced flat cutting discsNon reinforced flat cutting off discs RIGHT

Art: MTB
The non reinforced cutting-off wheels are suited to be used machines with a fixed base, where the wheels are properly guarded and operates on a controlled cutting plane.
It is recommended to pay the maximum attention to the cutting speed that should be the highest possible marked on the wheel.

ø

Width

Bore

Abrasive

100 1 16 A80P
150 1 20 A80P
150 1,6 20 A80P
200 1,6 20 A80P

NON REINFORCED CUTTING DISCS

 

www.rosver.com